Product parameters:
YZ25T-2200 | Driveshaft component horizontal press fitting hydraulic machine |
Nominal pressure | 63kN |
Indenter to table maximum distance | 400mm |
Main cylinder bore × rod diameter × stroke | φ100×φ55×300 |
Workbench specifications | 390×300×50 |
Characteristics | This machine is used to press or weld automotive drive shaft parts. According to the length of the shaft tube, adjust the position of the tailstock, place the shaft tube horizontally on the tooling, mount the fork head on the flange of the box, and then press the switch to press the fork head parts into the shaft tube of the drive shaft. |